UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor epech
Visitor
3,460 Views
Registered: ‎07-21-2016

PrefetchAbortHandler

I'm trying to run a very simple "Hello World" baremetal program on the Zedboard. 

 

I wrote a function where I'm trying to configure a VDMA:

 

static unsigned long g_Framebuffer1[FRAMEBUFFER_SIZE];
static unsigned long g_Framebuffer2[FRAMEBUFFER_SIZE];
static unsigned long g_Framebuffer3[FRAMEBUFFER_SIZE];

static XAxiVdma_Config* pAxiVdmaConfig;
static XAxiVdma g_AxiVdma;
static XAxiVdma_DmaSetup g_DmaSetup;

void ConfigureVDMA()
{
	pAxiVdmaConfig = XAxiVdma_LookupConfig(XPAR_AXI_VDMA_0_DEVICE_ID);

	XAxiVdma_CfgInitialize(&g_AxiVdma, pAxiVdmaConfig, 0);
	g_DmaSetup.EnableCircularBuf = 1;
	g_DmaSetup.EnableFrameCounter = 0;
	g_DmaSetup.EnableSync = 0;
	g_DmaSetup.FixedFrameStoreAddr = 0;
	g_DmaSetup.FrameStoreStartAddr[0] = (u32) &g_Framebuffer1;
	g_DmaSetup.FrameStoreStartAddr[1] = (u32) &g_Framebuffer2;
	g_DmaSetup.FrameStoreStartAddr[2] = (u32) &g_Framebuffer3;
	g_DmaSetup.FrameDelay = 0;
	g_DmaSetup.GenLockRepeat = 0;
	g_DmaSetup.HoriSizeInput = 1280;
	g_DmaSetup.PointNum = 0;
	g_DmaSetup.Stride = 1280;
	g_DmaSetup.VertSizeInput = 1080;

	XAxiVdma_StartWriteFrame(&g_AxiVdma, &g_DmaSetup);
}

 

 

 

When I try to debug the software, if I have that function in the code it will go directly to the PrefetchAbortHandler, even if the function is not called from anywhere in the software.

 

If I comment out the function then the debugger will run correctly and it'll start at main where I can step through the code as expected.

 

I tried the following:

* Commented out the function and the call to the function => OK

* Leave function in the code, commented out the call to the function from main => Error

* Leave function in the code, leave the call to the function from main => Error

 

I have the same problem when I try to configure a VTC.

 

Any ideas are welcome.

 

Thanks!

 

 

 

0 Kudos
1 Reply
Visitor ajk
Visitor
1,077 Views
Registered: ‎12-22-2016

Re: PrefetchAbortHandler

Hello,

I am using SDK 2016.2 and have exactly the same problem. I have added a file with some functions for SPI IP. As I was trying out the working of the SPI, I coded different functions. So, when I finally ended up with the functions that I know works right for the SPI, I commented out the unwanted functions. These were also not called in any other part of code. When starting debug with SDK, it lands at FreeRTOS_PrefetchAbortHandler. If I simply removed the comments around the functions, the Debug works.

 

Kindly help. Thanks.

0 Kudos