UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer peterpan007
Observer
133 Views
Registered: ‎01-18-2018

RT Application on Cortex R5 controlled by Hypervisor on Ultrascale+ zcu102

Hi all,

 

I have a design decision question. I would like to have a Non-RT application on APU and an RT application on RPU of a ZCU102 Ultrascale+ both managed by a hypervisor. But as mentioned in the UltraScale Design methodology, Cortex-R5 does not support virtualization. Does that mean that I cannot have control over RPU from the Xen-RT Hypervisor? What would be the design flow if two RT and non-RT application should be controlled by a hyperviosor?

 

Regards,

P

0 Kudos
1 Reply
Moderator
Moderator
65 Views
Registered: ‎06-27-2017

Re: RT Application on Cortex R5 controlled by Hypervisor on Ultrascale+ zcu102

Hi @peterpan007 

We do not have solution directly to run application on RPU. But you can use openamp to download the firmware using Remoteproc procedure. Refer UG1186 latest document for further 

Best Regards
Kranthi
--------------------------
Don't forget to reply, kudo, and accept as solution.
0 Kudos