01-06-2015 03:48 AM
Is there any tutorial which explains the processing of creating and importing custom IP in XPS 14.5.
IP is of type connected to AXI4 Bus which is Burst capable, high throughput and Memory Mapped Interface.
All the tutorials currently available only explains the addition of an IP of type which can be connected over AXI4_lite bus.
I tried to create one of the kind previously mentioned, But i am not successful.
Is it necessary to add a BRAM and its controllers specially when we are creating this kind of IP ??
01-06-2015 04:08 AM - edited 01-06-2015 04:10 AM
Please check if these helps.
01-06-2015 04:16 AM - edited 01-06-2015 04:16 AM
Please check the EDK CTT. This is a old one but this is valid for XPS 14.5.
Chapter-6 would be relevant. Hope this helps.
01-06-2015 08:09 PM
Thanks for replying.
But that was not useful.
I want a tutorial if any of them shows creating a custom IP which facilitates Burst Transaction support.
01-06-2015 09:18 PM
Check the attachment with the answer record below:
It has a collection of Verilog template of AXI4 (full) master and AXI4 (full) slave. These should support burst transactions.