UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor kmudide
Visitor
183 Views
Registered: ‎12-05-2018

Upload fpga code from zynqmp to peripheral.

Hi All, 

  We have a complex embedded system with zynqmp processor running Xilinx's Linux and several other peripherals. Peripherals have fpgas and we would like to program peripherals in the field whenever there are changes to fpga code. These peripherals have jtag interface and TAP signals are mapped as gpios in zynqmp.

 The fpga files are in svf, xsvf or some other format. I am looking for c/c++ code that can parse these files and update peripherals.

Do you have suggestions?

Thanks,

 

 

 

 

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
83 Views
Registered: ‎07-12-2018

Re: Upload fpga code from zynqmp to peripheral.

Hi @kmudide,

 

Please follow the below link for an example 

https://www.xilinx.com/support/documentation/application_notes/xapp058.pdf

Best Regards
Abhinay PS
------------------------------------------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give kudos to a post which you think is helpful and reply oriented.
-------------------------------------------------------------------------------------------------------------------------------

0 Kudos