UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Participant canonind
Participant
2,169 Views
Registered: ‎05-08-2013

ZYNQ and NAND Flash

Hello,

 

We are working on a custom board with a ZYNQ FPGA (xc7z020-clg484, speed grade: -3).

 

On the board there is a Micron NAND Flash (MT29F1G08ABBDAHC).

 

The example we are using is C:\Xilinx\14.5\ISE_DS\EDK\sw\XilinxProcessorIPLib\drivers\nandps_v1_03_a.

 

The test output indicates that the test is failed. During the debug through the test, we were able to receive the "ONFI" code. So that indicates the timing is OK I guess. However we can only read "FFh" after the write operation.

 

Did anyone manage to get it working or has an idea?

 

Thanks,
Berk

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
2,124 Views
Registered: ‎07-31-2012

Re: ZYNQ and NAND Flash

Hi Berk,

 

Can you send me the process which you followed to select the NAND flash on the PS side. Which version of XPS are you using? 

 

However since this is Embedded Query i am moving it to the Embedded Board.

Thanks,
Anirudh

PS: Please MARK this as an answer in case it helped resolve your query.Give kudos in case the post guided you to a solution.
0 Kudos