UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor ian.maw
Visitor
316 Views
Registered: ‎02-03-2014

Zynq I2C Bus Glitch Question (Regarding AR# 61861)

Jump to solution

Hi,

If we run the I2C bus master on the Zynq PS pins at 100KHz or slower i.e. standard mode, not fast mode are these glitches still a potential issue please or is it more related to the speed capabilities of the attached I2C bus peripherals ?

Thanks,

Ian

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Scholar drjohnsmith
Scholar
275 Views
Registered: ‎07-09-2009

Re: Zynq I2C Bus Glitch Question (Regarding AR# 61861)

Jump to solution
The glitch filter is missing, and needs to be done by the user.

the chip, no matter what speed the I2C is, still sees very short glitches as valid data so they need to be filtered.

follow the app note,
2 Replies
Scholar drjohnsmith
Scholar
276 Views
Registered: ‎07-09-2009

Re: Zynq I2C Bus Glitch Question (Regarding AR# 61861)

Jump to solution
The glitch filter is missing, and needs to be done by the user.

the chip, no matter what speed the I2C is, still sees very short glitches as valid data so they need to be filtered.

follow the app note,
Visitor ian.maw
Visitor
246 Views
Registered: ‎02-03-2014

Re: Zynq I2C Bus Glitch Question (Regarding AR# 61861)

Jump to solution

Thanks.

0 Kudos