UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor aamre3
Visitor
861 Views
Registered: ‎11-27-2017

help sending data from pc to fpga using uart communication

Hi,

i'm using a Nexys video board , and i'm trying to create a communication between pc and the board using UART, i'm currently using vivado 2017.4 with VHDL, and i have some problemes doing that... i have a programme that i got from my reasearch, it does a simple work, when i send data from the pc to the board, it send it back, it works perfectly but i need more than that, i need to send a tram of 128bits to the board and do a XOR on it, and send it back to the pc, can some one help mee please to figure it out, i use hercule 3-2-8 as a terminal on pc.

Tags (3)
0 Kudos
1 Reply
Scholar jmcclusk
Scholar
823 Views
Registered: ‎02-24-2014

Re: help sending data from pc to fpga using uart communication

Your simplest solution is to implement a picoblaze or microblaze processor with a UART, and then write a little program to receive and send data to the PC.

Don't forget to close a thread when possible by accepting a post as a solution.