UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor singularwoo
Visitor
272 Views
Registered: ‎08-12-2018

use iomodule together with other ips in microblaze system

I am using the microblaze processor. Now I need ips such as iobus, iic, uart. But I can't find an iobus ip alone. The ip IOModule does include the iobus function, but when I build a block design with microblaze, iomodule and other ips, the sysyem failed. What's wrong of my design? And is there any other ways that I can use iobus with other ips in microblaze design?
Thanks!
0 Kudos
1 Reply
Moderator
Moderator
223 Views
Registered: ‎07-31-2012

Re: use iomodule together with other ips in microblaze system

Hi @singularwoo,

 

You need to enable IO bus in IO module configuration under System tab.

Refer to figure 4-2 in https://www.xilinx.com/support/documentation/ip_documentation/iomodule/v3_0/pg111-iomodule.pdf

 

Regards

Praveen


-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos