UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor odie1983
Visitor
3,498 Views
Registered: ‎09-15-2008

10/100/100Mb Ethernet MAC simulation

Hi,

 

I'm using the tri-mode (10/100/100Mb) Ethernet MAC LogiCore. I have read that simulation is possible with ModelSim in the user guide, but can I also do a simulation with the Xilinx built-in simulator? I want to verify that my own logic is working together with the core and I'm not so familiar with ModelSim. Untill now I didn't managed to get it working. If I, for example, want to write some data to the MDIO interface, nothing happens on these outputs.

 

I'm using the simulation license provided with ISE Webpack 10.1.02.

 

Regards, Sander

0 Kudos