cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
765 Views
Registered: ‎04-25-2017

10G/25G ethernet subsystem interface microblaze

Jump to solution

I am trying to bring up Linux on the microblaze platform. I have to use 10G ethernet port as primary ethernet. (10G IP: 10G/25G ethernet subsystem) Can I get a reference design or a a block design or any pointer on how to interface or connect the IP with Microblaze?

 

System details:

Vivado 2018.3, Virtex Ultrascale+, XCVU9P.

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
720 Views
Registered: ‎11-09-2017

Hi

For 10G/25G ethernet subsystem xilinx provides Znyq based reference design xapp1305, you can change it to Microblaze.

Regards
Pratap

Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.

View solution in original post

0 Kudos
2 Replies
Highlighted
Moderator
Moderator
721 Views
Registered: ‎11-09-2017

Hi

For 10G/25G ethernet subsystem xilinx provides Znyq based reference design xapp1305, you can change it to Microblaze.

Regards
Pratap

Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.

View solution in original post

0 Kudos
Highlighted
Moderator
Moderator
705 Views
Registered: ‎09-12-2007

There is also baremetal applications that yhou can use to test the AXI Ethernet delivered with the standalone driver. 

0 Kudos