cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Visitor
Visitor
442 Views
Registered: ‎04-13-2020

10G Ethernet on RFSoC Devices

Jump to solution

Is it possible to have 10G ethernet on RFSoC devices. I am planning to use XCZU28DR device. Is there any IP core to support 10G ethernet for this device?

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
403 Views
Registered: ‎03-30-2016

Hello @Sumanta 

RFSoC has a similar fabric architecture compared to other UltraScale+ devices. GTY architecture is the same for UltraScale+ devices.
I can confirm using Vivado 2019.2 that "10G/25G High Speed Ethernet Subsystem v3.1" can be generated without any issue.

I will ask Ethernet/Document team to add RFSoC for supported device for next PG210 document update.

Regards
Leo

View solution in original post

4 Replies
Highlighted
Xilinx Employee
Xilinx Employee
430 Views
Registered: ‎03-30-2016

Hello @Sumanta 

Yes, the following 10G Ethernet IP can be used with UltraScale+ GTY.
https://www.xilinx.com/support/documentation/ip_documentation/xxv_ethernet/v3_1/pg210-25g-ethernet.pdf
You need to get an evaluation license for this IP to use it on your HW.

Regards
Leo

0 Kudos
Highlighted
Visitor
Visitor
426 Views
Registered: ‎04-13-2020
Hi Karnanl,
Thanks.
The supported device family is showing as
Zynq® UltraScale+™ MPSoC,
Virtex® UltraScale+™,
Kintex® UltraScale+™
Virtex® UltraScale™,
Kintex UltraScale

There is no mention about RFSoC Devices. Can you please clarify?
0 Kudos
Xilinx Employee
Xilinx Employee
404 Views
Registered: ‎03-30-2016

Hello @Sumanta 

RFSoC has a similar fabric architecture compared to other UltraScale+ devices. GTY architecture is the same for UltraScale+ devices.
I can confirm using Vivado 2019.2 that "10G/25G High Speed Ethernet Subsystem v3.1" can be generated without any issue.

I will ask Ethernet/Document team to add RFSoC for supported device for next PG210 document update.

Regards
Leo

View solution in original post

Highlighted
Visitor
Visitor
388 Views
Registered: ‎04-13-2020

Thank You very much Leo.