UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer umeshatop
Observer
336 Views
Registered: ‎03-24-2017

2 set of AXI 1G/2.5 Ethernet Subsytem with SGMII interface enabled

Jump to solution

Hi,

I'm new to usage of transcievers. I'm using 2 sets of AXI 1G/2.5G Ethernet Subsytem with SGMII interface enabled on both EMAC Ports. I'm getting the Error as attached in the snapshot. I have also shared the the block design and pinout details,for your reference. I'm using Xilinx device xc7z015clg485-1.

It would be great, If somebody could share the user guide to use multiple EMAC with SGMII interface enabled.

GTPE2_COMMON.JPG
Block_design.JPG
Pinout_details_1.JPG
Pinout_details_2.JPG
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
302 Views
Registered: ‎09-05-2018

Re: 2 set of AXI 1G/2.5 Ethernet Subsytem with SGMII interface enabled

Jump to solution

Hey @umeshatop,

That part only has the one GT quad, so you'll have to use the shared logic for one of the cores. For one of the IP, can you go to the shared logic tab and change the option to "include shared logic in example design"?

Nicholas Moellers

Xilinx Worldwide Technical Support

View solution in original post

4 Replies
Highlighted
Xilinx Employee
Xilinx Employee
303 Views
Registered: ‎09-05-2018

Re: 2 set of AXI 1G/2.5 Ethernet Subsytem with SGMII interface enabled

Jump to solution

Hey @umeshatop,

That part only has the one GT quad, so you'll have to use the shared logic for one of the cores. For one of the IP, can you go to the shared logic tab and change the option to "include shared logic in example design"?

Nicholas Moellers

Xilinx Worldwide Technical Support

View solution in original post

Observer umeshatop
Observer
261 Views
Registered: ‎03-24-2017

Re: 2 set of AXI 1G/2.5 Ethernet Subsytem with SGMII interface enabled

Jump to solution
Thanks! Its working. I'm now able to generate for 4 EMAC's also.
0 Kudos
Moderator
Moderator
249 Views
Registered: ‎08-25-2009

Re: 2 set of AXI 1G/2.5 Ethernet Subsytem with SGMII interface enabled

Jump to solution

Hi @umeshatop ,

As it's working now, can you please mark the relavent post as "Accepted Solution" so it will benifit other users? Thank you!

 

"Don't forget to reply, kudo and accept as solution."
0 Kudos
Observer umeshatop
Observer
231 Views
Registered: ‎03-24-2017

Re: 2 set of AXI 1G/2.5 Ethernet Subsytem with SGMII interface enabled

Jump to solution
Hi,
Yes. I have marked it as Accepted solution.
Thanks,
0 Kudos