cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
9,080 Views
Registered: ‎03-27-2013

Hardware based ethernet data transfer on Xilinx Zynq 706 board

Hi All,

 

My objective is to implement hardware based ethernet data transfer on Xilinx Zynq-706 board SoC. Could you please provide me the link where i can get the sample codes?

 

Alternatively i have tried to download the Zynq7000AP_SoC_Ethernet_Packet_Redirection_Design.zip package from the below web link:

http://www.wiki.xilinx.com/Zynq-7000+AP+SoC+-+Performance+-+Ethernet+Packet+Inspection+-+Bare+Metal+-+Redirecting++Packets+to+PL+Tech+Tip

 

I found that C:\Zynq7000AP_SoC_Ethernet_Packet_Redirection_Design\tech_tip_eth_1 folder is missing., So i am unable to access the source codes.

 

Appreciated if you could help me out.

 

Thanks,

SV

 

0 Kudos
3 Replies
yenigal
Xilinx Employee
Xilinx Employee
9,067 Views
Registered: ‎02-06-2013

Hi

 

The source file can be accessed from the below link.

 

 

https://secure.xilinx.com/webreg/register.do?group=clickthrough&cid=343185&cancellink=http%3A%2F%2Fwww.wiki.xilinx.com%2FZynq-7000%2BAP%2BSoC%2B-%2BPerformance%2B-%2BEthernet%2BPacket%2BInspection%2B-%2BBare%2BMetal%2B-%2BRedirecting%2B%2BPackets%2Bt...

Regards,

Satish

--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------
0 Kudos
9,025 Views
Registered: ‎03-27-2013

Hi, 

Thanks Alot for replying.Actually my requirement is to move ethernet packets using XEMAC_PS on Xilinx Zynq 7000 board with linux build., Could you please provide me the necessary source codes and build procedures for ethernet packet redirection patch for Linux?

 

Alternatively, could you please provide us the suggestion whether it is a right approach to convert Bare Metal ethernet codes to linux?

I was successfully move Ethernet packets using XEMAC_PS using Bare Metal standalone solution source codes provided by Xilinx Zynq. 

 

Link: http://www.wiki.xilinx.com/Zynq-7000+AP+SoC+-+Performance+-+Ethernet+Packet+Inspection+-+Bare+Metal+-+Redirecting++Packets+to+PL+Tech+Tip

 

 

Thanks

SV

 

 

 

 

 

 

Tags (1)
0 Kudos
fmaliks25
Visitor
Visitor
1,618 Views
Registered: ‎02-19-2018

i know its an old post but i can't access the source codes through the bellow link

http://zynq7000ap_soc_ethernet_packet_redirection_design.zip/

 

please help.

0 Kudos