cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ron_1
Newbie
Newbie
220 Views
Registered: ‎08-21-2019

How to configure the ethernet to be used with R5 cores of ultrascale+?

Jump to solution

Currently, we are trying to bring up the ethernet communication for R5 cores on zcu102 board.  What are the general steps for the configuration to allow the R5 core access the GEM?  We are doing it in bare-metal. Are there any documents or examples for that?

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
nanz
Moderator
Moderator
185 Views
Registered: ‎08-25-2009

Hi @ron_1 ,

To start, I would recommend using Vitis with a pre-provided XSA file. Several screenshots are shown below so you can choose the processor and generate ethernet examples. 

nanz_0-1616753980868.png nanz_1-1616754019329.png

nanz_2-1616754055913.png

nanz_3-1616754077360.png

 

nanz_4-1616754098650.png

 

 


-------------------------------------------------------------------------------------------

Don’t forget to reply, kudo, and accept as solution.

If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs and our Versal Ethernet Sticky Note.

-------------------------------------------------------------------------------------------

View solution in original post

1 Reply
nanz
Moderator
Moderator
186 Views
Registered: ‎08-25-2009

Hi @ron_1 ,

To start, I would recommend using Vitis with a pre-provided XSA file. Several screenshots are shown below so you can choose the processor and generate ethernet examples. 

nanz_0-1616753980868.png nanz_1-1616754019329.png

nanz_2-1616754055913.png

nanz_3-1616754077360.png

 

nanz_4-1616754098650.png

 

 


-------------------------------------------------------------------------------------------

Don’t forget to reply, kudo, and accept as solution.

If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs and our Versal Ethernet Sticky Note.

-------------------------------------------------------------------------------------------

View solution in original post