UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor p_poshtiban
Visitor
6,210 Views
Registered: ‎01-09-2016

Linking TEMAC Core to 1/2.5G Ethernet PCS/PMA Core

Hi every body;

I'm tring to use TEMAC IP Core with 1/2.5G Ethernet PCS/PMA Core. I've selected Phy interface as "Internal". I've 2 problems to link these 2  IP Cores.

1. In Phy core what should I do with "gmii_tx_clk"? I know in internal mode there is no "gmii_tx_clk" pin for TEMAC.

2. There is a pin named "clk_enable" in TEMAC, What should I do with this pin???

Thanks.

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
5,998 Views
Registered: ‎02-06-2013

Re: Linking TEMAC Core to 1/2.5G Ethernet PCS/PMA Core

Hi

 

You can refer the reference design present in below links

 

http://www.xilinx.com/support/answers/59968.html

 

http://www.xilinx.com/support/answers/65494.html

Regards,

Satish

--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------
0 Kudos