Maximum data rate possible for Ethernet implementation in ZCU 106

[venugopal.kulkarni]

I want to know in ZCU106 reference board:

1) Maximum possible data rate that can be achieved by implementing Ethernet . (PS and PL section both).

2) How many I/O Banks (or number of pins) required for Both (PS/PL).

3) If I go for HDMI, What can be maximum data rate?

4) Is there any special port or I/O provided for HDMI or we have to use the common I/O bank (please mention the bank number and number of pins required)? 

Thanks in advance.

[nanz · Accepted solution]

Hi @venugopal.kulkarni ,

1) Our application note XAPP1305 has the performance data documented as following:

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841752/ZynqMP+Ethernet+Performance+2017.3

This is based on ZCU102 and will be very similar to what you can get on ZCU106.

2) Please check XAPP1305 example design to get this info.

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841830/PS+and+PL+based+Ethernet+in+Zynq+MPSoC

3) & 4) For HDMI related questions, please post your questions on Video and Audio board below:

https://forums.xilinx.com/t5/Video-and-Audio/bd-p/DSPTOOL