cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
arlogise
Visitor
Visitor
194 Views
Registered: ‎03-25-2021

Not receiving data on AXI Ethernet 1G/2.5G v7.1 SGMII

Hi all,

I’m using the AXI 1G/2.5G Ethernet Subsystem v7.1 in Vivado 2019.1.

I want to implement a simulation between 2 systems on 1Gb Ethernet link, with the aim of analyzing the performance of IEEE 1588.

But I already have some problems with the simulation : I am not receiving neither the frames (m_axis_rxd) nor the timestamp (m_axis_rxs). Could you help me ?

 

Thank you in advance for your support!

settingsIP1.png
settingsIP_8.png
settingsIP_7.png
settingsIP2.png
settingsIP0.png
IP_simu.png
0 Kudos
1 Reply
nanz
Moderator
Moderator
138 Views
Registered: ‎08-25-2009

Hi @arlogise ,

Are you using the example design simulation out of box? If so, it does not support 1588 simulation out of box. Users will need to add logics if 1588 is desired to be seen in simulation. 

Can you please confirm without 1588, the simulation works well? 


-------------------------------------------------------------------------------------------

Don’t forget to reply, kudo, and accept as solution.

If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs and our Versal Ethernet Sticky Note.

-------------------------------------------------------------------------------------------
0 Kudos