cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Observer
Observer
384 Views
Registered: ‎07-07-2020

O-RAN IF IP Core: Using Example System

Jump to solution

Hey,

I was wondering how I could setup the ORAN IF Example System in order to demonstrate its capabilities and I have a few questions:

- Is the Example System implementable with two ZCU102's or with just one? If with two, how would I go about it? Should I just implement the example system in both boards and connect them? 

- Once implemented, is there any software that allows for the arriving and transmiting packets? (how do I know that the system is behaving as expected, is basicly the question)

- Does the IEEE 1588v2 support require another independent 10G/25G High Speed Ethernet connection?

 

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Xilinx Employee
Xilinx Employee
232 Views
Registered: ‎08-02-2007

@vessils 

Here is the link for Oran Radio IP demo scripts : https://github.com/Xilinx/wireless-xorif/tree/master/scripts

Just follow the instructions, you should be able to generate everything.

View solution in original post

0 Kudos
3 Replies
Highlighted
Xilinx Employee
Xilinx Employee
334 Views
Registered: ‎05-01-2013

Yes, we've the O-RAN demo to interconnect 2 ZCU102 boards.

Here it is.

https://github.com/Xilinx/wireless-apps

0 Kudos
Highlighted
Observer
Observer
296 Views
Registered: ‎07-07-2020

Thanks, but isnt this repository correspondent to the old RoE IpCore? I'm reffering to the new O-RAN IF for Vivado 2020.1.

But still, how does this demo scripts work? do they show the core's behaviour through apps running on the petalinux image running on the board?

0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
233 Views
Registered: ‎08-02-2007

@vessils 

Here is the link for Oran Radio IP demo scripts : https://github.com/Xilinx/wireless-xorif/tree/master/scripts

Just follow the instructions, you should be able to generate everything.

View solution in original post

0 Kudos