cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
pofeng1885
Contributor
Contributor
3,254 Views
Registered: ‎04-06-2011

RXNOTINTABLE Error of GTX(Kintex7) use as SATA 3 Protocol...

Hi  Forks

 

In my project I use GTX as the Phy of SATA3 protocol..

In my test process,after download bitfile,there is no error of GTX ,then I start dma read and write test...But after several minutes(sometimes may be longer), error happens as follow picture(Chipscope)

Capture.PNG

And this status continute untill reset the hardware of board..

Does anyone encounter this???

 

Pofeng

0 Kudos
2 Replies
mrwanghl
Participant
Participant
2,996 Views
Registered: ‎04-01-2012

hi pofeng,

    premilary i had success implemented the sata2.0 hostcontroller using virtex5.

    recently i met the same problem with you, have you solved the problem?

0 Kudos
pofeng1885
Contributor
Contributor
2,977 Views
Registered: ‎04-06-2011

Hi,,
My problem have not been saved, but I think this problem related to the CPLL_CFG parameter and the HDD(which brand) you use for test.

Pofeng
0 Kudos