cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Visitor
Visitor
7,704 Views
Registered: ‎11-12-2014

RocketIO GTP Simulation Problem

Hello,

 

I am trying to use RocketIO GTP Wizard v2.1, but right after I finish customizing the IP Core, I get such an error message:

 

 

ERROR:ProjectMgmt:387 - TOE: ITclInterp::ExecuteCmd gave Tcl result 'invalid command name "com.xilinx.coreutil.exception.SWinconsistency:"'.
Tcl_ErrnoId: ENOENT
Tcl_ErrnoMsg: no such file or directory
_cmd: ::xilinx::Dpm::dpm_chCreateNewSource $piThisInterface
errorInfo: invalid command name "com.xilinx.coreutil.exception.SWinconsistency:"
    while executing
"com.xilinx.coreutil.exception.SWinconsistency: "
    (file "D:/desktop/tmp/sil1/kor_xmdf.tcl" line 1)
    invoked from within
"source [ lindex $xmodPaths 0 ]"
    (procedure "::utilities_xmdf::xmdfLoadXmod" line 50)
    invoked from within
"::utilities_xmdf::xmdfLoadXmod $moduleName 0 $filesDir "
    (procedure "::utilities_xmdf::xmdfGetOutputList" line 13)
    invoked from within
"::utilities_xmdf::xmdfGetOutputList $sModule $sFilesDir _XmdfOutputList"
    (procedure "dpm_coregenGetOutputList" line 23)
    invoked from within
"dpm_coregenGetOutputList $sCoreModuleName $iProject $sCoreDir _genList"
    (procedure "dpm_coregenCreateCore" line 50)
    invoked from within
"$_sCreate $_filePath $_iNewSourceComp _OutputFileList"
    (procedure "::xilinx::Dpm::dpm_chCreateNewSource" line 61)
    invoked from within
"::xilinx::Dpm::dpm_chCreateNewSource $piThisInterface"

 

 

I found some suggestions to overcome this problem (such as updating the IP, giving the same name to both project and core, etc.) but none worked for me. There are some files created under the core folder, but all vhd files are filled with the following message:

 

com.xilinx.coreutil.exception.SWinconsistency:

 Sim Parameter 'GTP0_USE_PORT_TXELECIDLE' not found

 

 

Any suggestions?

 

Thank you

0 Kudos
Reply
6 Replies
Scholar
Scholar
7,696 Views
Registered: ‎06-05-2013

@sinan.taylan Looks like crash, What ISE version are you using? Can you try with 14.7 if using older one

-Pratham

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Reply
Moderator
Moderator
7,676 Views
Registered: ‎02-16-2010

Which device are you targeting
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
Tags (1)
0 Kudos
Reply
Visitor
Visitor
7,664 Views
Registered: ‎11-12-2014

xc5vlx50t
0 Kudos
Reply
Visitor
Visitor
7,661 Views
Registered: ‎11-12-2014

Firstly I used 12.1 after 14.2 and 14.4. I have not any solution about this topic
0 Kudos
Reply
Moderator
Moderator
7,656 Views
Registered: ‎02-16-2010

If you are enabling TXELECIDLE port while generating, please try to generate without this signal enabled.
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
0 Kudos
Reply
Moderator
Moderator
7,655 Views
Registered: ‎02-16-2010

if you find .xco file in the generated files, please share it.
------------------------------------------------------------------------------
Don't forget to reply, give kudo and accept as solution
------------------------------------------------------------------------------
0 Kudos
Reply