cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mtnli89
Visitor
Visitor
301 Views
Registered: ‎11-29-2020

SFP+ and kintex7

Hi

I want to run SFP+ in my FPGA (kintex7). actually I used 10 Gigabit Ethernet Subsystem v3.1 IP core and it would seem that everything runs ok. Now, I have a question. Can I implement tcp/ip or udp/ip both? there would not be any problem by using these two protocols?

Thanks

 

0 Kudos
1 Reply
nanz
Moderator
Moderator
275 Views
Registered: ‎08-25-2009

Hi  @mtnli89 ,

Yes, you can. But Xilinx does not provide 10G baremetal driver if you are looking to implement it in standalone. In Linux, it's supported:

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842485/Linux+AXI+Ethernet+driver

 


-------------------------------------------------------------------------------------------

Don’t forget to reply, kudo, and accept as solution.

If starting with Versal take a look at our Versal Design Process Hub and our Versal Blogs and our Versal Ethernet Sticky Note.

-------------------------------------------------------------------------------------------