cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Newbie
Newbie
355 Views
Registered: ‎07-06-2018

SP701 Ethernet Design Example

Jump to solution

Dear All,

 

is there somewhere an example design using both PHYs TI DP83867IRPA on SP701 board available? Or at least one? Vivado project would be really cool. Thank you!

 

Linas

0 Kudos
Reply
1 Solution

Accepted Solutions
Scholar
Scholar
346 Views
Registered: ‎08-07-2014

@lnsru ,

I doubt if there is one for SP701 .

However you can use this one to have an idea what to do.

https://www.xilinx.com/support/documentation/boards_and_kits/ac701/2014_4/xtp223-ac701-ethernet-c-2014-4.pdf

Also the TEMAC Eth IP comes comes with an example_design which provides an AXI4_Lite to MDIO/MDC state-machine code using which the registers of DP83867IRPA can be set as per you needs.

What you might need to change is also the top level XDC file as your board is SP701.

 

------------FPGA enthusiast------------
Consider giving "Kudos" if you like my answer. Please mark my post "Accept as solution" if my answer has solved your problem

View solution in original post

1 Reply
Scholar
Scholar
347 Views
Registered: ‎08-07-2014

@lnsru ,

I doubt if there is one for SP701 .

However you can use this one to have an idea what to do.

https://www.xilinx.com/support/documentation/boards_and_kits/ac701/2014_4/xtp223-ac701-ethernet-c-2014-4.pdf

Also the TEMAC Eth IP comes comes with an example_design which provides an AXI4_Lite to MDIO/MDC state-machine code using which the registers of DP83867IRPA can be set as per you needs.

What you might need to change is also the top level XDC file as your board is SP701.

 

------------FPGA enthusiast------------
Consider giving "Kudos" if you like my answer. Please mark my post "Accept as solution" if my answer has solved your problem

View solution in original post