UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
721 Views
Registered: ‎02-20-2016

Zynq UltraScale PS GTR SGMII support

Jump to solution

Hi @nanz!

Following the question Does PS-GTR support 1000BASE-X?:

Do you mean that PS GTR in Zynq UltraScale+ support only Cisco SGMII specification and don't support 1000BASE-X Auto-Negotiation functionality defined in Clause 37 of the IEEE 802.3? What type of Auto-Negotiation should I use to connect to link partner via backplane?

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
685 Views
Registered: ‎08-25-2009

Re: Zynq UltraScale PS GTR SGMII support

Jump to solution

Hi @miloserdin,

 

Yes, that is correct. Currently, only PS-GTR SGMII is supported. We do have a road map to support 1000BASE-X (1000BASE-SX and 1000BASE-LX only ) but the time frame is not finalized yet.

"Don't forget to reply, kudo and accept as solution."

View solution in original post

0 Kudos
1 Reply
Highlighted
Moderator
Moderator
686 Views
Registered: ‎08-25-2009

Re: Zynq UltraScale PS GTR SGMII support

Jump to solution

Hi @miloserdin,

 

Yes, that is correct. Currently, only PS-GTR SGMII is supported. We do have a road map to support 1000BASE-X (1000BASE-SX and 1000BASE-LX only ) but the time frame is not finalized yet.

"Don't forget to reply, kudo and accept as solution."

View solution in original post

0 Kudos