cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
267 Views
Registered: ‎02-11-2019

ieee ha1588 ip implemwntation in zynq xc7z020 soc

Hello..

i have xilinx zynq xc020 soc . i am new to the PTP implementation.

in my design i have three ethernet one is connected to PS through mii.one more is connected to gmii_to_rgmii ip core through zynq emii. one more is connected to axi-1G/2.5G ethernet subsystem. The external Phy is microchip(KSZ9031RNX). is same for three ethernet's.

Is there any possibility is there to implement the PTP in this system.if there is any way please give me the solution for this ?

0 Kudos
2 Replies
Highlighted
Moderator
Moderator
146 Views
Registered: ‎08-25-2009

Hi tnareshnaresh7@gmail.com ,

PTP is zynq GEM is not supported. It's not accurate enough.

You can use AXI Ethernet subsystem to implement PTP. For more info, please refer to PG138.

"Don't forget to reply, kudo and accept as solution."
0 Kudos
Highlighted
127 Views
Registered: ‎02-11-2019

Hello ..

Thank you for responding to my query.

In my design i have AXI-subsytem ethernet with GMII interface . Is it posible to implemnet in GMII interface for PTP core.

0 Kudos