UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor hodler
Visitor
9,202 Views
Registered: ‎03-04-2013

FMC extension board for Zync ZC702 Evaluation board

Hi,

 

We are developing FMC extension board that sits and works with ZC702 Evaluation board. Planned to use FMC connector J3. Our extension board should have 1x SPI interface, 2x CAN interface & 1x GMII Ethernet interface.

 

As per the ZC702 eval board user guide(UG850), we know that the FMC connector J3 in zync board uses PL IO's (LAXX*). But we would like to bring out PS IO's (MIO) with SPI, Ethernet & CAN soft IP's shared through PL IO's. Is this possible?

 

Also we understand from Zync SoC TRM manual(UG585), the MIO pins can be routed to PL IO's through EMIO pins. If so can i route SPI, Ethernet and CAN signals available in PS_MIO signals to PL IO's (LAXX*)? If yes, kindly let me know, which PL (LAXX*) pins can be mapped to SPI, Ethernet and CAN signals.

 

Appeciate your early reply....

 

Thanks & Regards

Sivakumar NM

Tags (1)
0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
8,943 Views
Registered: ‎08-01-2012

Re: FMC extension board for Zync ZC702 Evaluation board

Refer http://www.xilinx.com/products/boards_kits/fmc.htm) for more details about FMC cards

 

 

________________________________________________

Please mark this post as an "Accept as solution" in case if it helped to resolve your query. So that it will help to other forum users to directly refer to the answer.

Give kudos to this post in case if you think the information is useful and reply oriented.

0 Kudos