UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer vnhegde
Observer
53 Views
Registered: ‎08-29-2018

JTAG configuration for emulated DSP on Zedboard

Hi,

 

We are facing an issue of JTAG clock is not getting driven by debugger in setup detailed below. I wanted to check, if  we need to use the 20pin-to-14pin JTAG adapter board in below scenario to overcome the issue. 

I am using Flyswatter2 debugger with 20-pin JTAG connector for debugging emulated DSP on FPGA of Zedboard (zynq 7000). Note that we are routing JTAG signals from emulated Tensilica core to 12-pin PMOD connector(JA1)  on Xilinx Zedboard. And the routed signals are hardwired to 20-Pin JTAG connector readily available with Flyswatter2 debugger. The connection diagram is attached herewith.  We are not using the standard 14-pin JTAG interface on our board. And we are using PMOD for JTAG interface as part of standalone bring-up of Tensilica core on FPGA.

 

Some signals on the 20-pin connector are floating. Also all signals driven from that 20-in connector need to be pulled high on our FPGA board..and we don't see these pull up resistors on our board. We have added pull-up resistor using xdc constraint in our design but not sure if it is sufficient.

 

Please let us know your suggestions on this.

 

Regards,

Vishwanath

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
22 Views
Registered: ‎08-10-2007

Re: JTAG configuration for emulated DSP on Zedboard

Zedboard is not a Xilinx Evaluation Kit, so it might be worth following up with http://zedboard.org/ for further support in relation to this.

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos