UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor claus75
Visitor
6,029 Views
Registered: ‎04-15-2015

ML605 webserver demo

Hello to the community, I am trying to run the webserver demo described in "UG668" without success. I set the jumpers, dip switches and network settings according to the document. All I see is the BIST coming up with its menu. The BIST runs ok, but where is the webserver? I cannot connect to the board (IP: 192.168.1.10). Is the webserver demo runnning in parallel to the BIST? I spend quit some time on that, reading several forum entries about that topic but without finding a solution for this maybe simple out-of-the-box demo. network setup: my IP: 192.168.1.100 my network mask: 255.255.255.0 board IP: 192.168.1.10 board and pc connected with the included ethernet cable. thanks for your support claus my hardware: ML605 REV D Virtex 6 CES 512MB DRAM / 2GB CF
Tags (1)
0 Kudos