UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Scholar ronnywebers
Scholar
1,124 Views
Registered: ‎10-10-2014

Vivado 2017.2 board definition files for Zedboard

Jump to solution

I'm using Vivado 2017.2 with a Zedboard, and when trying connection automation, i.e. to connect AXI GPIO pins to the leds or pushbuttons, things no longer work.

 

I tried zedboard.org first for an updated board def file, but the page says : Board Definition Files for the ZedBoard are preloaded into Vivado

 

Anyone using the Zedboard with 2017.2?

 

 

 

 

** kudo if the answer was helpful. Accept as solution if your question is answered **
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
1,908 Views
Registered: ‎11-09-2015

Re: Vivado 2017.2 board definition files for Zedboard

Jump to solution

Hi @ronnywebers,

 

Could you give more information when you say "things no longer work". I have tried with 2017.2:

When I create a new project, I can select the board without getting the board file from AVNET:

zed01.PNG

 

And I am able to run connection automation without issues:

zed05.PNG

 

Just a sanity check: do you have all the check boxes enabled?

zed04.PNG

 

Regards,

 

Florent

 


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
2 Replies
Highlighted
Moderator
Moderator
1,909 Views
Registered: ‎11-09-2015

Re: Vivado 2017.2 board definition files for Zedboard

Jump to solution

Hi @ronnywebers,

 

Could you give more information when you say "things no longer work". I have tried with 2017.2:

When I create a new project, I can select the board without getting the board file from AVNET:

zed01.PNG

 

And I am able to run connection automation without issues:

zed05.PNG

 

Just a sanity check: do you have all the check boxes enabled?

zed04.PNG

 

Regards,

 

Florent

 


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
Scholar ronnywebers
Scholar
1,091 Views
Registered: ‎10-10-2014

Re: Vivado 2017.2 board definition files for Zedboard

Jump to solution

Thanks @florentw, I think I just selected the Microzed board instead of Zedboard, I went over it again and now it works ... sorry for my stupidity :-)

 

** kudo if the answer was helpful. Accept as solution if your question is answered **
0 Kudos