05-25-2017 10:10 PM
I'm using the ZC702 evaluation board.
I configured the 100MHz clock for FCLK_CLK0 from PS to PL, and I measured the clock frequency by exporting to a external pin.
But the frequency is measured as 50MHz.
Is there anyone who can solve it?
05-26-2017 12:28 AM
It looks like your processing system was not getting initialized, therefore the default clock was output
Onto the pin.
After you exported to SDK, and download the bitstream, You need to download the application (run as/debug as). In doing so, this will initialize the PS with the ps7_init.tcl file.