UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
202 Views
Registered: ‎02-26-2019

ZCU102 APU Performance Monitoring

Jump to solution

How can I access APU performance registers from a C program? I am especially interested in determining CPU load, L1 hit/miss, etc. Basically the same metrics that can be read graphically using the SDK SPM project.

The assumption is that no operating system is used (standalone BSP). I am looking for a starting point on how to get access to the information outlined above. Documents like ug1145-sdk-system-performance seem to aim at graphic display.

Tags (4)
0 Kudos
1 Solution

Accepted Solutions
Voyager
Voyager
163 Views
Registered: ‎04-13-2015

Re: ZCU102 APU Performance Monitoring

Jump to solution

alexander.walsch@ge.com 

You can get all the info about performance monitoring in the ARM V8 architecture Reference doc itself:

https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile

Look into section D6

0 Kudos
3 Replies
Scholar xilinxacct
Scholar
175 Views
Registered: ‎10-23-2018

Re: ZCU102 APU Performance Monitoring

Jump to solution
0 Kudos
Voyager
Voyager
164 Views
Registered: ‎04-13-2015

Re: ZCU102 APU Performance Monitoring

Jump to solution

alexander.walsch@ge.com 

You can get all the info about performance monitoring in the ARM V8 architecture Reference doc itself:

https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile

Look into section D6

0 Kudos
Visitor julianop99
Visitor
122 Views
Registered: ‎11-23-2018

Re: ZCU102 APU Performance Monitoring

Jump to solution

Gents

I am looking for basically same thing as Alexander, but would like to run SPM for my Ultrazed-EG board, which has a XCZU3EG device.

Any thoughts about how to adapt (or if I can eventually use) the SPM_ZU_102_HwPlatform project to have access to the CPU and PL performance metrics, please?

Best regards.

0 Kudos