UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor mengjiuxi
Visitor
427 Views
Registered: ‎06-04-2018

ZCU102 FMC HDMI Input

We know that ZCU102 has 1 HDMI RX connector. However, we need one more HDMI RX connector for our applications. Could I know if this FMC-HDMI card TB-FMCH-HDMI4K can also work on ZCU102. From their website, it says it works fine with KC705.

https://solutions.inrevium.com/products/pdf/TB_FMCH_HDMI4K_HWUserManual_2.03e.pdf

Also, could I also know if there is the difference between the FMC interface on KC705 and ZCU102?

Many thanks.

0 Kudos
5 Replies
Xilinx Employee
Xilinx Employee
396 Views
Registered: ‎08-25-2010

Re: ZCU102 FMC HDMI Input

Hi @mengjiuxi,

There is a pin count, LPC(low pin count) and HPC(high pin count). Mating LPC to HPC or vice versa, will function, however some of pins will be "no connects".

 

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Visitor mengjiuxi
Visitor
386 Views
Registered: ‎06-04-2018

Re: ZCU102 FMC HDMI Input

thanks, Simon,

We are aware of the difference between HPC and LPC, but what we would like to know is that whether the FMC-HDMI board will work on the ZCU102 as it is not listed in the official Xilinx FMC webpage.

https://www.xilinx.com/products/boards-and-kits/fmccards.html#imageprocessing

Without a 100% guarantee, we cannot decide to purchase either the ZCU102 nor the FMC board.

0 Kudos
Xilinx Employee
Xilinx Employee
370 Views
Registered: ‎08-25-2010

Re: ZCU102 FMC HDMI Input

Hi @mengjiuxi,

 

The site may need an update. From the I/O count and I/O standard, e.g. CML and other differential I/O standard are included in ZCU102. ZCU102 support the FMC board:

http://www.xilinx.com/support/documentation/boards_and_kits/zcu102/ug1182-zcu102-eval-bd.pdf

 

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Moderator
Moderator
271 Views
Registered: ‎04-12-2017

Re: ZCU102 FMC HDMI Input

Hello @mengjiuxi

Have you referred the HDMI PG236 page number 58 and 59.

1_2.JPG15.JPGIf you will see above two images; both of them are almost same.

There shouldn't be a problem for you adding FMC card on ZCU102.

Thank you

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
139 Views
Registered: ‎08-10-2007

Re: ZCU102 FMC HDMI Input

The following Answer Record might also help you when assessing whether the FMC card will work with the ZCU102:

Answer Record #68377: https://www.xilinx.com/support/answers/68377.html

 

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos