UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
274 Views
Registered: ‎06-21-2013

ZCU111 Board Support Package missing recipes.

Jump to solution

Hi all,

It would appear that the board support packages xilinx-zcu111-v2018.3-final.bsp and xilinx-zcu111-v2018.3-final.bsp are missing the associated recipe files for the rftool, rfdc and rfdc example.  

I have read the solution posted at 

https://forums.xilinx.com/t5/Embedded-Linux/Missing-edits-for-PetaLinux-2018-2-for-zcu111/td-p/910188

But have been unable to locate the recipe files.   I think the solution is suggesting copying the compiled files in a pre-built version on to the built target.  If this is the case then this is a workaround and the recipe files need to be added to the associated BSPs.

 

Regards

 

Walter

0 Kudos
1 Solution

Accepted Solutions
Explorer
Explorer
216 Views
Registered: ‎06-21-2013

Re: ZCU111 Board Support Package missing recipes.

Jump to solution

I think I now understand the confusion.   I think it is down to a tale of two bsps.   

The recipes are located in the  rdf0476-zcu111-RFdc-eval-tool-2018-3.zip reference design in the rfsoc_petalinux_bsp.bsp located in the rdf0476-zcu111-RFdc-eval-tool-2018-3/apu directory when you unzip.  The one that should be used for the trf is rfsoc_petalinux_bsp.bsp

I have been using this xilinx-zcu111-v2018.3-final.bsp which is the referenced link at the Petalinux download.

The confusion is that both bsp target the same board, but are not the same.

Hope this helps 

 

Regards

 

 

Walter

2 Replies
Moderator
Moderator
223 Views
Registered: ‎04-18-2011

Re: ZCU111 Board Support Package missing recipes.

Jump to solution

The RF Data converter evaluation design ug1287 design files come with the BSP for the evaluation setup. The recipes for the rftool is in this BSP 

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
Explorer
Explorer
217 Views
Registered: ‎06-21-2013

Re: ZCU111 Board Support Package missing recipes.

Jump to solution

I think I now understand the confusion.   I think it is down to a tale of two bsps.   

The recipes are located in the  rdf0476-zcu111-RFdc-eval-tool-2018-3.zip reference design in the rfsoc_petalinux_bsp.bsp located in the rdf0476-zcu111-RFdc-eval-tool-2018-3/apu directory when you unzip.  The one that should be used for the trf is rfsoc_petalinux_bsp.bsp

I have been using this xilinx-zcu111-v2018.3-final.bsp which is the referenced link at the Petalinux download.

The confusion is that both bsp target the same board, but are not the same.

Hope this helps 

 

Regards

 

 

Walter