UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer kvkhekale
Observer
156 Views
Registered: ‎11-17-2018

image_echo_test not running (getting stucked) on zybo

Hello

I am trying to run pre-built application image_echo_test on zybo using openamp.

I have followed all the steps as per UG1186 as well as edited the device tree and copied the BOOT.bin, image.ub, system.bit, zynq_fsbl.elf and system.dtb fles on BOOT partition on SD card.

The linux on SD card boots well.

But when I try to run the image_echo_test by giving "echo" command, it gets stucked at "Booting fw image image_echo_test"

Only the remoteproc driver is getting installed at startup, but not "virtio" driver. 

Not able to find out the step I am missing in the overall procedure.

Please guide me for the above problem. 

Attaching the error screenshot with this post

Screenshot 2019-01-25 18.25.18.png
0 Kudos