UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Contributor
Contributor
3,542 Views
Registered: ‎07-24-2009

kcu105 PCIe reference designs with Windows 8

I'm trying to run kcu105 PCIe reference designs (UG918-UG920) at Windows 8.1 x64 machine. Driver is successfully installed, Xilinx device is seen in Device Manager as well as in lspci output. But GUI (which is run under Admin) says that "No Xilinx device found with device ID 8011, 8082 or 8083".

Is there way to run example at Windows version other than 7 ?

0 Kudos
4 Replies
Xilinx Employee
Xilinx Employee
3,526 Views
Registered: ‎08-01-2008

Re: kcu105 PCIe reference designs with Windows 8

you required to use software and hardware mention in the trd user guide .

Check this ARs in case help you
https://www.xilinx.com/support/answers/57470.html
Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
0 Kudos
Explorer
Explorer
3,484 Views
Registered: ‎10-14-2015

Re: kcu105 PCIe reference designs with Windows 8

Hi @5506273,

 

This TRD tested with Window7.

 

https://www.xilinx.com/support/documentation/boards_and_kits/kcu105/2016_3/ug920-kcu105-pcie-streaming-data-plane-trd.pdf

 

Thanks,

Sarada

 

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

TRD.JPG
0 Kudos
Visitor lujian_12
Visitor
868 Views
Registered: ‎05-12-2018

Re: kcu105 PCIe reference designs with Windows 8

hello 5506273,

I have met the same question,I run it in windows10,I also can install the drive which the xilinx remind ,I have open the GUI in windows10 ,But GUI (which is run under Admin) says that "No Xilinx device found with device ID 8011, 8082 or 8083". so  how can I run this example? have you solve it ?please help me!

195ce44d474a9c3aa78f65790b30088.pngd6f109f40bb4a42decabfe9af72cf17.pngthanks you very much !

0 Kudos
Visitor lujian_12
Visitor
836 Views
Registered: ‎05-12-2018

Re: kcu105 PCIe reference designs with Windows 8

have you solve this problem? I want weather you can help me.

0 Kudos