cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
nmurthy
Observer
Observer
279 Views
Registered: ‎05-27-2018

Device is Not Getting Booted from XCF32

We are Working on a New Custom Board Using XQ5VFX100T-EF1136 and connected as Below.

Enabled two options for FPGA configuration, Please find attached Schematics.

1.From SPI flash in direct and indirect mode

2.From Platform flash XCF32 in Master SelectMap mode used Two XCF32

Issue:

The FPGA and Other Devices are getting detected using JTAG chain and Programmed XCF32 Devices for Booting Purpose.

On the power up the Device is Not booting from Compact Flash. The CCLK is coming as 2MHz.  

Request you to suggest debugging the Issue.

0 Kudos
0 Replies