cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
benaka
Adventurer
Adventurer
1,429 Views
Registered: ‎08-04-2018

Hello world configuration

Hi, 

 

I 'm trying to get the HELLO WORLD program to run. 

 

I managed to get through all the previous errors and now, I am(I guess) error free, but I don't see t he HELLO WORLD being printed.

 

Here is my SDK log

 

10:43:46 INFO : 'stop' command is executed.
10:43:46 ERROR : AP transaction error, DAP status f0000021
10:43:46 INFO : ----------------XSDB Script----------------
connect -url tcp:127.0.0.1:3121
source E:/Xilinx_new/the_mission/ps_tut7/31_oct_brm/project_1/project_1.sdk/design_1_wrapper_hw_platform_0/ps7_init.tcl
targets -set -nocase -filter {name =~"APU*" && jtag_cable_name =~ "Platform Cable USB II 00001a056cbf01"} -index 0
loadhw E:/Xilinx_new/the_mission/ps_tut7/31_oct_brm/project_1/project_1.sdk/design_1_wrapper_hw_platform_0/system.hdf
targets -set -nocase -filter {name =~"APU*" && jtag_cable_name =~ "Platform Cable USB II 00001a056cbf01"} -index 0
stop
ps7_init
----------------End of Script----------------

10:45:03 INFO : 'targets -set -filter {jtag_cable_name =~ "Platform Cable USB II 00001a056cbf01" && level==0} -index 1' command is executed.
10:45:04 INFO : 'fpga -state' command is executed.
10:45:10 INFO : Connected to target on host '127.0.0.1' and port '3121'.
10:45:10 INFO : Jtag cable 'Platform Cable USB II 00001a056cbf01' is selected.
10:45:10 INFO : 'jtag frequency' command is executed.
10:45:10 INFO : Sourcing of 'E:/Xilinx_new/the_mission/ps_tut7/31_oct_brm/project_1/project_1.sdk/design_1_wrapper_hw_platform_0/ps7_init.tcl' is done.
10:45:10 INFO : Context for 'APU' is selected.
10:45:10 INFO : Hardware design information is loaded from 'E:/Xilinx_new/the_mission/ps_tut7/31_oct_brm/project_1/project_1.sdk/design_1_wrapper_hw_platform_0/system.hdf'.
10:45:10 INFO : Context for 'APU' is selected.
10:45:10 INFO : 'stop' command is executed.
10:45:11 INFO : 'ps7_init' command is executed.
10:45:11 INFO : 'ps7_post_config' command is executed.
10:45:11 INFO : Context for processor 'ps7_cortexa9_0' is selected.
10:45:11 INFO : Processor reset is completed for 'ps7_cortexa9_0'.
10:45:11 INFO : Context for processor 'ps7_cortexa9_0' is selected.
10:45:12 INFO : The application 'E:/Xilinx_new/the_mission/ps_tut7/31_oct_brm/project_1/project_1.sdk/bram_1/Debug/bram_1.elf' is downloaded to processor 'ps7_cortexa9_0'.
10:45:12 INFO : ----------------XSDB Script----------------
connect -url tcp:127.0.0.1:3121
source E:/Xilinx_new/the_mission/ps_tut7/31_oct_brm/project_1/project_1.sdk/design_1_wrapper_hw_platform_0/ps7_init.tcl
targets -set -nocase -filter {name =~"APU*" && jtag_cable_name =~ "Platform Cable USB II 00001a056cbf01"} -index 0
loadhw E:/Xilinx_new/the_mission/ps_tut7/31_oct_brm/project_1/project_1.sdk/design_1_wrapper_hw_platform_0/system.hdf
targets -set -nocase -filter {name =~"APU*" && jtag_cable_name =~ "Platform Cable USB II 00001a056cbf01"} -index 0
stop
ps7_init
ps7_post_config
targets -set -nocase -filter {name =~ "ARM*#0" && jtag_cable_name =~ "Platform Cable USB II 00001a056cbf01"} -index 0
rst -processor
targets -set -nocase -filter {name =~ "ARM*#0" && jtag_cable_name =~ "Platform Cable USB II 00001a056cbf01"} -index 0
dow E:/Xilinx_new/the_mission/ps_tut7/31_oct_brm/project_1/project_1.sdk/bram_1/Debug/bram_1.elf
----------------End of Script----------------

10:45:12 INFO : Memory regions updated for context APU
10:45:12 INFO : Context for processor 'ps7_cortexa9_0' is selected.
10:45:12 INFO : 'con' command is executed.
10:45:12 INFO : ----------------XSDB Script (After Launch)----------------
targets -set -nocase -filter {name =~ "ARM*#0" && jtag_cable_name =~ "Platform Cable USB II 00001a056cbf01"} -index 0
con
----------------End of Script----------------

10:45:12 INFO : Launch script is exported to file 'E:\Xilinx_new\the_mission\ps_tut7\31_oct_brm\project_1\project_1.sdk\.sdk\launch_scripts\xilinx_c-c++_application_(system_debugger)\system_debugger_using_debug_bram_1.elf_on_local.tcl'

 

 

 

I have a putty configured to read from the COM port.

xili.PNG

also my sdk window, with a lil bit mor einfo.

 

Kindly help me.

 

Thanks in Advance.

0 Kudos
3 Replies
vijoys
Moderator
Moderator
1,372 Views
Registered: ‎09-19-2018

Hi @benaka,

 

Could you check if your USB-UART connection shows up as a COM port in Device Manager > Ports? If it doesn't trying using a different cable/USB port on your PC.

 

Also, have a look at this tutorial [you might have to tweak some parameters based on your target board]

http://www.fpgadeveloper.com/2014/07/creating-a-base-system-for-the-zynq-in-vivado.html

 

Thanks,

Vijoy

 

 

 

Thanks,
Vijoy Sunil Kumar
Product Applications Engineer

- Don't forget to reply, kudo and accept as solution
0 Kudos
benaka
Adventurer
Adventurer
1,355 Views
Registered: ‎08-04-2018

Yes, the COM port is available, it also shows in the SDK terminal, that its connected to that particular COM port.
0 Kudos
vijoys
Moderator
Moderator
1,277 Views
Registered: ‎09-19-2018

Hi @benaka,

 

It seems from your screenshot that you have a breakpoint at main. Continue past the breakpoint and check if you are getting your output on the terminal.

 

Thanks,

Vijoy.

Thanks,
Vijoy Sunil Kumar
Product Applications Engineer

- Don't forget to reply, kudo and accept as solution
0 Kudos