cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
765 Views
Registered: ‎11-19-2018

Physical address in a SEM IP

Jump to solution

Hello everyone.

I have a question about the report of SEM Ip Core.

I subjected my Artix 7 to a beam of neutrons and using SEM Ip Core I received this report

SC 04$
SED OK$
PA 0002051E$
LA 00000774$
WD 44 BT 0B$
COR$
WD 44 BT 0B$
END$
FC 00$
SC 08$
FC 40$
SC 02$
O> $
SC 04$
SED OK$
PA 0002051F$
LA 00000775$
WD 44 BT 0B$
COR$
WD 44 BT 0B$
END$

 

etc...

 

How can I know, based on PA and LA, where exactly the errors have occurred in my board (Block Ram's, Lut's locations etc.) ?

Is there a software to do this?

 

Thanks to all!

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
706 Views
Registered: ‎01-15-2008

there is no software/script to know which fpga resources is injected with errors. 

If you are able to inject errors and detect/correct it, then the sem implementation in your design is working fine.

This should be ok to move ahead with your design

 

 

View solution in original post

0 Kudos
2 Replies
Highlighted
Moderator
Moderator
707 Views
Registered: ‎01-15-2008

there is no software/script to know which fpga resources is injected with errors. 

If you are able to inject errors and detect/correct it, then the sem implementation in your design is working fine.

This should be ok to move ahead with your design

 

 

View solution in original post

0 Kudos
Highlighted
695 Views
Registered: ‎11-19-2018

Thank you!

0 Kudos