cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
umuhire
Visitor
Visitor
287 Views
Registered: ‎03-22-2019

Programming a Flash memory over PCIe for Artix 7

Jump to solution
Dear community, I have read the Application note (XAPP518) regarding an In-system programming of BPI PROM using PCIe. It seems to be only appliable to Virtex-6, Virtex-7 and Kintex 7. How about the Artix 7? Thank you, Regards, Angélique
0 Kudos
1 Solution

Accepted Solutions
iguo
Xilinx Employee
Xilinx Employee
231 Views
Registered: ‎08-10-2008

PCIe port of A7 is different so you will need to write your own code for this part. 

The high level programming strategy would be no difference.

------------------------------------------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
---------------------------------------------------------------------------------------------------------

View solution in original post

0 Kudos
1 Reply
iguo
Xilinx Employee
Xilinx Employee
232 Views
Registered: ‎08-10-2008

PCIe port of A7 is different so you will need to write your own code for this part. 

The high level programming strategy would be no difference.

------------------------------------------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
---------------------------------------------------------------------------------------------------------

View solution in original post

0 Kudos