UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
1,270 Views
Registered: ‎11-21-2016

Programming of ZC706 via JTAG USB

Jump to solution

Hi Everyone,

 

I am using the ZC706 Eval board and trying to program the FPGA device. However I came across 2 issues while programming via Hardware Manager. Here are some snapshots regarding this issue.

 

It says programmed on the top, instead of Device xc7045 (JTAG device index = 1) is programmed. (DONE status = 1).

 

Any help is highly appreciated. Thank you.

 

Regards,

Suraj Kothari

autoconnect.PNG
open_new_hw.PNG
programmed.PNG
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Scholar hbucher
Scholar
1,940 Views
Registered: ‎03-22-2016

Re: Programming of ZC706 via JTAG USB

Jump to solution

@suraj.kothari Last time I got this was a glitch with another board. 

Disconnect any other boards you have, even if they are powered down.

Kill the hardware server (hw_server.exe in Windows Task Manager) and restart Vivado.

 

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.

View solution in original post

2 Replies
Highlighted
Scholar hbucher
Scholar
1,941 Views
Registered: ‎03-22-2016

Re: Programming of ZC706 via JTAG USB

Jump to solution

@suraj.kothari Last time I got this was a glitch with another board. 

Disconnect any other boards you have, even if they are powered down.

Kill the hardware server (hw_server.exe in Windows Task Manager) and restart Vivado.

 

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.

View solution in original post

Contributor
Contributor
1,256 Views
Registered: ‎11-21-2016

Re: Programming of ZC706 via JTAG USB

Jump to solution

Hi @hbucher:

 

Thank you.

I haven't connected any other boards except this one.

 

I tried your method and ended all the processes related to Xilinx such as cmd.exe, conhost.exe, vivado.exe and hw_server.exe.

 

This helped me detect and successfully program the FPGA.

I still have to connect other boards to this board and program each one sequentially.

 

Thanks once again. Your solution helped.

 

Regards,

Suraj