UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor autrusson
Visitor
222 Views
Registered: ‎11-15-2018

QSPI FLASH boot failed

Hello,

 

I am using the AC701 demo board, when i program the external clock by divided by 2 to have 45 MHz, it'ok the done rise to one.When i program by devided by one to have a clock at 90 Mhz,

it's does'nt work the done nerver rise to one !

 

best regards

0 Kudos
1 Reply
Moderator
Moderator
205 Views
Registered: ‎10-19-2011

Re: QSPI FLASH boot failed

Could you provide some more details of the clocking setup. What external clock are you referring too here? If you don't use QSPI loading of the image, does the design work straight from jtag?

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------