cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
garengllc2
Observer
Observer
143 Views
Registered: ‎09-18-2020

QSPI/HyperBus core as a slave

I have a design with an STM32H microcontroller interfaced to a Kintex-7.  I had planned on having a QSPI interface between the two for a high-speed data link, but I recently figured out that the Xilinx QUADSPI core won't operate in slave mode (for QSPI).  Since there didn't seem to be an off-the-shelf option for QSPI slaves, I started looking into the HyperBUS protocol (which had been my original plan anyway).  Cypress supplies a HyperBUS controller, but only in master mode as well.

So I figured I would check to see if there was a core I was forgetting about before I start estimating the effort to design a QSPI or HyperBUS slave core by hand.

0 Kudos
0 Replies