UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer davidfi1
Observer
367 Views
Registered: ‎10-08-2018

Two Platform Cable USB II not working with Vivado 2017.4

Jump to solution

Hi.

I would like to use 2 Platform Cable USB II - to debug 2 boards.

In the SDK I could not use "manual mode" to select witch board is witch - and the AUTO option is not working.

I see both devices in the win10 device manager.

Please HELP!.

0 Kudos
1 Solution

Accepted Solutions
Observer davidfi1
Observer
292 Views
Registered: ‎10-08-2018

Re: Two Platform Cable USB II not working with Vivado 2017.4

Jump to solution

The solution is very simple! - no need for all the stuff in the link.

The place to select whitch usb cable to use is in the small triangle - and not on the list.

I opened debug configuration -> FPGA:Untitled.jpg

0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
308 Views
Registered: ‎06-21-2018

Re: Two Platform Cable USB II not working with Vivado 2017.4

Jump to solution

Hi davidfi1,

Here's an explanation on how to do it:

https://www.xilinx.com/support/answers/64252.html

Let me know if that doesn't work for you.

Thanks,

Andres

 

0 Kudos
Observer davidfi1
Observer
293 Views
Registered: ‎10-08-2018

Re: Two Platform Cable USB II not working with Vivado 2017.4

Jump to solution

The solution is very simple! - no need for all the stuff in the link.

The place to select whitch usb cable to use is in the small triangle - and not on the list.

I opened debug configuration -> FPGA:Untitled.jpg

0 Kudos