UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer tinghao780609
Observer
212 Views
Registered: ‎12-09-2018

Hi 

I want to programe the bitstream in FPGA(my board is ZCU106).

but I got this errror message

ERROR: [Labtools 27-3303] Incorrect bitstream assigned to device. Bitstream was generated for part xczu7ev-ffvc1156-2-e, target device (with IDCODE revision 0) is compatible with es2 revision bitstreams.

To allow the bitstream to be programmed to the device, use "set_param xicom.use_bitstream_version_check false" tcl command.
ERROR: [Labtools 27-3165] End of startup status: LOW
ERROR: [Common 17-39] 'program_hw_devices' failed due to earlier errors.

So in acording this message I install the ES verison in vivado,but I can't find that the xczu7ev-ffvc1156 has ES2 verison.

What should I do?

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
174 Views
Registered: ‎07-16-2019

Re: ZCU106

Jump to solution

Hi,

Copy and paste the "set_param" command up to and including the "false" to your tcl command line on Vivado

See if that works

 

Ebrahim

View solution in original post

0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
175 Views
Registered: ‎07-16-2019

Re: ZCU106

Jump to solution

Hi,

Copy and paste the "set_param" command up to and including the "false" to your tcl command line on Vivado

See if that works

 

Ebrahim

View solution in original post

0 Kudos
Observer tinghao780609
Observer
124 Views
Registered: ‎12-09-2018

Re: ZCU106

Jump to solution
Hi ebrahimm

It seem to work, thanks for your help.

0 Kudos