cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
eagleask
Newbie
Newbie
1,724 Views
Registered: ‎12-27-2017

ADC to USB3.0 interface

Hi,

I must make bridge from 2xLTC2292 to FT601 USB.

I am new in fpga so my question is which fpga should I use?

My first choice is :

XC2C256-7VQG100C or XC6SLX4-2CSG225C.

Will be enough?

I need only bridge and will not be any data processing on fpga. I just need time and 4 channels ADC value.

Tags (2)
0 Kudos
2 Replies
josephsamson
Explorer
Explorer
1,619 Views
Registered: ‎10-05-2010

You might want to consider an Artix7 or Spartan7 instead of the Coolrunner or Spartan6. The 7 Series parts use the newest Vivado toolchain. To develop Spartan6 and Coolrunner, you'll need ISE, which is no longer in development (although now I see there is an ISE port to Windows 10).

 

---

Joe Samson

0 Kudos
u4223374
Advisor
Advisor
1,529 Views
Registered: ‎04-26-2015

@eagleaskIt'll be easier on the Spartan 6 than on the CoolRunner II - but as @josephsamson has said, a Spartan 7 would be the preferred platform for this.

0 Kudos