cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
9,450 Views
Registered: ‎06-19-2015

Adding Microblaze processor C files using TCL script

Hi,

I have a Microblaze processor and other VHDL RTL under one TOP VHDL module. I have written some firmware C application on Microblaze processor. I am compiling the C code to get the output elf. The whole system is working as expected.

 

Now I am trying to build the project using TCL scripting. I am able to generate .bit file using TCL script. But I did not find any way to add the firmware C files(in SDK) to the Microblaze processor and compile them using TCL script. Is there any standard way of doing this?

Tags (3)
0 Kudos
2 Replies
Highlighted
Xilinx Employee
Xilinx Employee
9,424 Views
Registered: ‎08-02-2007

Re: Adding Microblaze processor C files using TCL script

hi,

 

have you looked at http://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_3/SDK_Doc/concepts/sdk_c_batch_mode.htm

 

there are pre-defined commands that help you do this.

 

--hem

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Highlighted
Scholar
Scholar
9,412 Views
Registered: ‎09-05-2011

Re: Adding Microblaze processor C files using TCL script

In addition, if you are using 2015.1 version, you can check the answer record:
http://www.xilinx.com/support/answers/64200.html
0 Kudos