cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jenslin
Visitor
Visitor
3,168 Views
Registered: ‎12-13-2010

Camera Link 28-bit signal mapping - SelectIO Block

Jump to solution

Can anyone describe how a 24-bit RGB data stream, FVAL, LVAL, and DE get connected to the 28-bit input "data_out_from_device[27:0]" on the SelectIO IP?  The IP has a setting to do Camera Link transmitting, but no spec on how to connect the data bits.  Does the block handle the camera link mapping of bits to the differential lines?

0 Kudos
1 Solution

Accepted Solutions
ddemmin
Participant
Participant
3,860 Views
Registered: ‎02-10-2009

http://alacron.com/clientuploads/PDFs/forweb/CameraLinkSPEC.pdf

 

Table 4-1 defines the pins of ports A,B, and C.

and

Appendix C

(R = port A, G = port B, B = Port C)

View solution in original post

1 Reply
ddemmin
Participant
Participant
3,861 Views
Registered: ‎02-10-2009

http://alacron.com/clientuploads/PDFs/forweb/CameraLinkSPEC.pdf

 

Table 4-1 defines the pins of ports A,B, and C.

and

Appendix C

(R = port A, G = port B, B = Port C)

View solution in original post