cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
1,819 Views
Registered: ‎02-12-2018

Forum, displaying timestamps

Jump to solution

I believe the timestamps in the community forum are not displayed correctly?

 

Lately is submitted an answer 2 hours before the question has been asked (according to time stamp):

https://forums.xilinx.com/t5/Embedded-Linux/Petalinux-2017-2-NFS-And-TFTP-boot-issue-does-not-get-copied/td-p/858671

 

This is likely due to the users preferences of timezone settings, but shouldn't ALL times be displayed with the SAME timezone?

Tags (2)
1 Solution

Accepted Solutions
hj
Moderator
Moderator
2,368 Views
Registered: ‎06-05-2013
Isn't it correct? One is midnight 12:13 AM( as per 12 HR format) or 00:13 AM (as per 24 HR format) . Other is morning i.e. 10:12 AM. So you posted exactly after 10 Hrs. :)
-------------------------------------------------------------------------------------
For more information please refer to configuration resources https://forums.xilinx.com/t5/FPGA-Configuration/Configuration-Resources/m-p/753763/highlight/true#M5891
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

4 Replies
florentw
Moderator
Moderator
1,799 Views
Registered: ‎11-09-2015

Hi @theultimatesource,

 

It looks correct to me.

First post: 23-05-2018 08:13 AM

first reply: 23-05-2018 03:36 PM

2nd reply: 23-05-2018 06:08 PM

3rd reply: 23-05-2018 06:12 PM

 

Could you give detail on this (what is your timezone?)?

 

@stacias, could you take a look at this ?

 

Regards


Florent
Product Application Engineer - Xilinx Technical Support EMEA
**~ Don't forget to reply, give kudos, and accept as solution.~**
1,771 Views
Registered: ‎02-12-2018

my timezone settings are GMT (default),

Display dates as: Use default (Absolute dates (e.g., 11-15-1966))

 

 

to me the linked site looks like this:

 

0 Kudos
hj
Moderator
Moderator
2,369 Views
Registered: ‎06-05-2013
Isn't it correct? One is midnight 12:13 AM( as per 12 HR format) or 00:13 AM (as per 24 HR format) . Other is morning i.e. 10:12 AM. So you posted exactly after 10 Hrs. :)
-------------------------------------------------------------------------------------
For more information please refer to configuration resources https://forums.xilinx.com/t5/FPGA-Configuration/Configuration-Resources/m-p/753763/highlight/true#M5891
-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

1,747 Views
Registered: ‎02-12-2018

hello @hj,

 

It is, indeed. I am sorry for the noise.