UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
2,967 Views
Registered: ‎11-01-2014

IP core IFFT v9 add to KC705

Jump to solution

Hi;

I try to add IP core IFFT v9  to the design but i got an error during synthesis as in attachment file. Please; How can I cover this error. 

 

Regards 

Sam.

Error IFFT.JPG
0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
5,546 Views
Registered: ‎02-06-2013

Re: IP core IFFT v9 add to KC705

Jump to solution

Hi

 

Change

 

s_axi_config_tdata <= '0000000000001000'

 

to

 

s_axi_config_tdata <= "0000000000001000"

 

Check if clk assigned to aclk port is being driven from the top correctly

Regards,

Satish

--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------
1 Reply
Xilinx Employee
Xilinx Employee
5,547 Views
Registered: ‎02-06-2013

Re: IP core IFFT v9 add to KC705

Jump to solution

Hi

 

Change

 

s_axi_config_tdata <= '0000000000001000'

 

to

 

s_axi_config_tdata <= "0000000000001000"

 

Check if clk assigned to aclk port is being driven from the top correctly

Regards,

Satish

--------------------------------------------------​--------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful.
--------------------------------------------------​-------------------------------------------