UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor willie1987
Visitor
9,301 Views
Registered: ‎10-18-2010

Interface ADC to FPGA

Jump to solution

Hi there,

 

I am rather new about FPGA design. But i'm stuck with this problem.

 

How to write up vhdl code to interface adc to FPGA ??  Currently, I am using Virtex-4 User FPGA: XC4VSX35-10FF668

Hope someone can assist me ..  (:

Thanks you in advance

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Teacher eilert
Teacher
11,544 Views
Registered: ‎08-14-2007

Re: Interface ADC to FPGA

Jump to solution

Hi,

most important is to take a look at the datasheet of the ADC you are going to use.

There you find a description of the ADCs interface, for which you have to design the counterpart in the FPGA.

That's a good starting point.

If you are lucky, it's some kind of standard, and you find many examples for it. Here, or at opencores or other FPGA related sites.

 

Have a nice synthesis

  Eilert 

View solution in original post

0 Kudos
5 Replies
Teacher eilert
Teacher
11,545 Views
Registered: ‎08-14-2007

Re: Interface ADC to FPGA

Jump to solution

Hi,

most important is to take a look at the datasheet of the ADC you are going to use.

There you find a description of the ADCs interface, for which you have to design the counterpart in the FPGA.

That's a good starting point.

If you are lucky, it's some kind of standard, and you find many examples for it. Here, or at opencores or other FPGA related sites.

 

Have a nice synthesis

  Eilert 

View solution in original post

0 Kudos
Visitor willie1987
Visitor
9,293 Views
Registered: ‎10-18-2010

Re: Interface ADC to FPGA

Jump to solution

Thanks for your quick response.

 

Don't mind if i can send you the file to have a look instead??

 

 

 

 

Tags (2)
0 Kudos
Teacher eilert
Teacher
9,269 Views
Registered: ‎08-14-2007

Re: Interface ADC to FPGA

Jump to solution

Hi,

feel free to send me your stuff via private message, if you don't want t o post it.

 

Regards

  Eilert

0 Kudos
Historian
Historian
9,256 Views
Registered: ‎02-25-2008

Re: Interface ADC to FPGA

Jump to solution

Homework assignment?

----------------------------Yes, I do this for a living.
0 Kudos
Visitor rago822
Visitor
8,971 Views
Registered: ‎12-16-2010

Re: Interface ADC to FPGA

Jump to solution

hi...i am having problems with the coding for interfacing of adc to fpga..im using a spartan 3e fpga..the ;problem is that the simulation is working as expected but the ouput on the leds are just kkeping on bl;inking...and i am not getting the value that corresponds to the formula...please clarify this for me

thanks a lot

0 Kudos