cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
prem_dreams4u
Visitor
Visitor
5,436 Views
Registered: ‎08-24-2009

hardware co-simulation for ML505 or XUPV5-LX110T

hi..!

i need your help, my target board is ML505 xc5vlx110t-1ff1136(i dont know if it is also called as ML509 or
XUPV5-LX110T)



screen shot 1

in above figure iam able to generate HDL netlist for my target device virtex5 xc5vlx110t-1ff1136

but i wanna do hardware co-simulation, so in system generator token i took option "Hardware co-simulation" as shown below, but my target board ML505 is not in the list, so i chose "New Compilation Target".

screen shot 2


and how to fill those options?
in "System Generator Board Description Builder"


i think for hardware co-simulation any board with jtag can be used...

also installation of new board
in "System Generator Board Description Builder" (for example ML505) is very easy if xilinx support provides .xml files for that particular board
 
so that by clicking button "Load" in "System Generator Board Description Builder" we can input .xml file you give and install support for new board.

because
adding ports or pins that are about 1000, is a headache, so xilinx must have a solution....!!!!!
 
if images above are not clear u can plz go here and zoom

http://picasaweb.google.co.in/prem.gprec/Project
Message Edited by prem_dreams4u on 09-27-2009 01:19 PM
0 Kudos
2 Replies
ywu
Xilinx Employee
Xilinx Employee
5,165 Views
Registered: ‎11-28-2007

When creating your own HWCOSIM target, you don't have to specify every single IOs available on the FPAG. You only need to add the ports that you used in your model. This blog http://myfpgablog.blogspot.com/2009/12/sysgen-create-new-hwcosim-target-with.html has step-by-step instructions on how to fill in the information for the SBDBuilder.

Cheers,
Jim
0 Kudos
sofiene
Contributor
Contributor
3,764 Views
Registered: ‎06-03-2011

 

Hello prem_dreams4u

 

I have the same board, and I have a problem with,

 

You can see my post here

 

Please tell me about the easier Board/PC way of connection (JTAG or Ethernet) for a successful HW co-sim.

How can you did it ?

 

Thank you in advance

 

Sofiene

Tags (1)
0 Kudos